 |
 |  |
The pneumatic vice is specially designed for the mass machining applications
requiring a fast, accurate, parallel clamping.
- The pneumatic systems allows a very short clamping, reduces handling time and increases the profitability of your machines. The pressure force being adjustable, the pneumatic vice can be used for clamping of any part.
- All the bearing surfaces and the slides are hardened and grinded. The bearing surfaces height is tolerenced, which will enable you, for your next purchase, to get a vise of the same height.
- With its 4 T slots, all the problems of stop handles, sizes ans special jaws adjustments are resolved.
- Due to its modular system, the polyvalence and jaws multiplication, the pneumatic vice type PS answers to the different requirements met in the Mechanical field.
|
| TYPE |
PS 70 |
PS 90 |
PS100-2 |
PS115 |
PS130-1 |
PS160 |
PS200 |
| Jaw width |
70 mm |
90 mm |
100 mm |
115 mm |
130 mm |
160 mm |
200 mm |
| Jaw opening |
100 mm |
130 mm |
126 mm |
145 mm |
164 mm |
200 mm |
280 mm |
| Jaw depth |
30 mm |
36 mm |
40 mm |
40 mm |
45 mm |
45 mm |
60 mm |
| Pneumatic stroke |
2 mm |
4 mm |
4 mm |
3.2 mm |
3.5 mm |
4 mm |
4.5 mm |
Clamping force with
6kg air pressure |
700 kg |
1000 kg |
1500 kg |
2200 kg |
3000 kg |
5000 kg |
7000 kg |
| Total length |
220 mm |
288 mm |
317 mm |
340 mm |
370 mm |
403 mm |
480 mm |
| Total height |
100 mm |
128 mm |
145 mm |
145 mm |
155 mm |
160 mm |
195 mm |
| Support surface height |
70 mm |
92 mm |
105 mm |
105 mm |
110 mm |
115 mm |
2 mm |
| Total width |
2 mm |
2 mm |
2 mm |
2 mm |
2 mm |
2 mm |
2 mm |
| Weight |
8.5 kg |
18 kg |
25 kg |
30 kg |
39 kg |
58 kg |
112 kg |
A self-centering pneumatic vice with a double effect for the inside or outside of any part, with machinable jaws.
|
- 3 mm total course allowiong clamping of raw parts.
- Clamping force adjustable from 0 to 800 kg (6 bars)
- Can be used as a double-vise with a fixed jaw in the center
- Can be disconnected from air supply during the use (palettising)
|
|
|